Yuyao Jingqiao Hardware Factory
Depart from the past and progress into the future.
Add to Cart
Air Conditioning Assembly Parts SPCC Steel Square Swirl Diffuser Air Flow
Product Description
The swirl diffuser is supplied with a square face plate. The face plate is made of SPCC steel and is
1.0mm thick. The surface of a swirl diffuser is powder coated with RAL9010, RAL9016 or RAL9003
according to clients’ requests.
Application of the Iris Damper
The ceiling swirl diffuser is used for low and medium pressure ventilation systems. It is easy to use
and can be installed with a plenum box to provide a uniform air supply and exhaust. The ceiling swirl
diffuser swirls the incoming air to mix the indoor air with fresh air. It has adjustable plastic control blades
to enable a steady air stream. The ceiling swirl diffuser is mostly installed in climate-controlled areas
and ventilated industrial spaces. The swirl diffuser is suitable for flush mounting on ceilings.
Product detail Images
Product Specification
| Item code | Face size (mm) | Slot number (mm) |
| SD-CA 300/08 | 298×298 | 8 |
| SD-CA 400/16 | 396×396 | 16 |
| SD-CA 500/24 | 498×498 | 24 |
| SD-CA 600/24 | 595×595 | 48 |
| SD-CA 625/24 | 623×623 | 24 |
| SD-CA 625/48 | 623×623 | 48 |
| SD-CB 600/24 | 595×595 | 24 |
FAQ
Q: What is the payment method?
A: We accept TT (Bank Transfer), L/C.
1. For total amount under US$3000, 100% in advance.
2. For total amount above US$3000, 30% in advance, the rest against the copy document.
Q: What is your MOQ?
A: MOQ depends on our client's needs, besides,we welcome trial order before mass-production.
Q: What is the production cycle?
A: It varies a lot depending on product dimension,technical requirements and quantity. We always
try to meet customers' requirement by adjusting our workshop schedule. Usually our normal lead
time is 25-30 days for 1 full container; it is also up to the actual production situation and products
structure.
Q: If you make poor quality goods,will you refund our fund?
A: We make products according to drawings or samples strictly until them reach your 100%
satisfaction.And actually we won't take a chance to do poor quality products.We are proud of
keeping the spirit of good quality.
Q: Could you offer competitive tooling cost?
A: We have own mold work-shop in our factory, for competitive tooling cost and on-time
samples.